4″ DC Plastic Impeller Solar Pump
Engineering note. Maximum head and maximum flow are curve endpoints, not one simultaneous duty point. Final selection is verified against your total head, required flow and solar resource.
- Permanent-magnet brushless motor + intelligent MPPT (auto start/stop, soft-start)
- Controller LED display: voltage / current / power / speed (RPM) / error code
- Oil cooling
- Full protection: over/under-voltage, overload, over-current, dry-run, reverse, over-temp
- Runs directly off PV modules — no batteries required
- Engineering-plastic impeller + SUS304 shaft & sleeve — economy clean-water build
Curvas de rendimiento (Q–H)
Curva altura–caudal de cada modelo de esta serie — datos exactos de nuestras fichas técnicas.
Especificaciones
| # | Model | Voltaje (V) | Potencia (W) | Corriente (A) | Caudal máx. (m³/h) | Altura máx. (m) | Salida | Ø (mm) | Longitud (mm) | Peso (kg) | Cable recomendado (mm²) | FV recomendado |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 4PSC3.0-30-24-300 | 24 | 300 | 12.5 | 3 | 30 | 1.25" | 98 | 770 | 8.9 | 4 | 1 × 400 Wp |
| 2 | 4PSC6.0-30-48-400 | 48 | 400 | 8.3 | 6 | 30 | 1.5" | 98 | 790 | 9.5 | 2.5 | 2 × 300 Wp |
| 3 | 4PSC3.5-50-48-400 | 48 | 400 | 8.3 | 3.5 | 50 | 1.25" | 98 | 790 | 9.5 | 2.5 | 2 × 300 Wp |
| 4 | 4PSC9.0-30-72-600 | 72 | 600 | 8.3 | 9 | 30 | 2" | 98 | 840 | 10.8 | 2.5 | 3 × 300 Wp |
| 5 | 4PSC6.0-40-72-600 | 72 | 600 | 8.3 | 6 | 40 | 1.5" | 98 | 840 | 10.8 | 2.5 | 3 × 300 Wp |
| 6 | 4PSC3.5-70-72-600 | 72 | 600 | 8.3 | 3.5 | 70 | 1.25" | 98 | 840 | 10.8 | 2.5 | 3 × 300 Wp |
| 7 | 4PSC13.0-30-96-750 | 96 | 750 | 7.8 | 13 | 30 | 2" | 98 | 870 | 11.7 | 2.5 | 3 × 300 Wp |
| 8 | 4PSC9.0-35-96-750 | 96 | 750 | 7.8 | 9 | 35 | 2" | 98 | 870 | 11.7 | 2.5 | 3 × 300 Wp |
| 9 | 4PSC6.5-55-96-750 | 96 | 750 | 7.8 | 6.5 | 55 | 1.5" | 98 | 870 | 11.7 | 2.5 | 3 × 300 Wp |
| 10 | 4PSC3.5-90-96-750 | 96 | 750 | 7.8 | 3.5 | 90 | 1.25" | 98 | 870 | 11.7 | 2.5 | 3 × 300 Wp |
| 11 | 4PSC14.0-45-144-1100 | 144 | 1100 | 7.6 | 14 | 45 | 2" | 98 | 955 | 13.9 | 2.5 | 6 × 300 Wp |
| 12 | 4PSC9.0-60-144-1100 | 144 | 1100 | 7.6 | 9 | 60 | 2" | 98 | 955 | 13.9 | 2.5 | 6 × 300 Wp |
| 13 | 4PSC6.5-85-144-1100 | 144 | 1100 | 7.6 | 6.5 | 85 | 1.5" | 98 | 955 | 13.9 | 2.5 | 6 × 300 Wp |
| 14 | 4PSC3.5-120-144-1100 | 144 | 1100 | 7.6 | 3.5 | 120 | 1.25" | 98 | 955 | 13.9 | 2.5 | 6 × 300 Wp |
| 15 | 4PSC20.0-45-192-1500 | 192 | 1500 | 7.8 | 20 | 45 | 2" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 16 | 4PSC14.5-70-192-1500 | 192 | 1500 | 7.8 | 14.5 | 70 | 2" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 17 | 4PSC10.0-90-192-1500 | 192 | 1500 | 7.8 | 10 | 90 | 2" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 18 | 4PSC7.0-110-192-1500 | 192 | 1500 | 7.8 | 7 | 110 | 1.5" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 19 | 4PSC4.5-130-192-1500 | 192 | 1500 | 7.8 | 4.5 | 130 | 1.25" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 20 | 4PSC30.0-35-280-2200 | 280 | 2200 | 7.9 | 30 | 35 | 2" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 21 | 4PSC20.0-65-280-2200 | 280 | 2200 | 7.9 | 20 | 65 | 2" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 22 | 4PSC14.5-100-280-2200 | 280 | 2200 | 7.9 | 14.5 | 100 | 2" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 23 | 4PSC10.0-130-280-2200 | 280 | 2200 | 7.9 | 10 | 130 | 2" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 24 | 4PSC7.5-150-280-2200 | 280 | 2200 | 7.9 | 7.5 | 150 | 1.5" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 25 | 4PSC4.5-190-280-2200 | 280 | 2200 | 7.9 | 4.5 | 190 | 1.25" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 26 | 4PSC30.0-50-385-3000 | 385 | 3000 | 7.8 | 30 | 50 | 2" | 98 | 1390 | 25.9 | 2.5 | 13 × 300 Wp |
| 27 | 4PSC20.0-75-385-3000 | 385 | 3000 | 7.8 | 20 | 75 | 2" | 98 | 1390 | 25.9 | 2.5 | 13 × 300 Wp |
| 28 | 4PSC14.5-120-385-3000 | 385 | 3000 | 7.8 | 14.5 | 120 | 2" | 98 | 1390 | 25.9 | 2.5 | 13 × 300 Wp |
| 29 | 4PSC10.0-170-385-3000 | 385 | 3000 | 7.8 | 10 | 170 | 2" | 98 | 1390 | 25.9 | 2.5 | 13 × 300 Wp |
| 30 | 4PSC7.5-210-385-3000 | 385 | 3000 | 7.8 | 7.5 | 210 | 1.5" | 98 | 1390 | 25.9 | 2.5 | 13 × 300 Wp |
Motor & Accionamiento
| Motor | Permanent-magnet DC brushless (PMSM) |
| Accionamiento | Sensorless FOC, pure sine-wave output |
| Seguimiento MPPT | >99% |
| Clase de aislamiento | F (155 °C) |
| Servicio | S1 (continuous) |
| Protección IP | IP68 (submersible motor) / IP66 |
| Inmersión máx. | 150 m |
| Garantía | 2 |
Controlador & Protecciones
| Controlador | Sensorless FOC sine-wave vector drive + MPPT (>99%), LED display |
| Pantalla | Voltage, Current, Power, Speed (RPM), Speed adjustment, Error code |
| Tamaño del controlador | 360 × 260 × 140 mm |
Condiciones de operación
| Temperatura del agua | 0–40 °C |
| Contenido de arena | ≤ 0.05 % (≤ 500 g/m³) |
| Rango de pH | 5–9 |
| Temperatura ambiente | -15 to 70 °C |
| Pozo mín. | 100 mm |
Materiales
- Standard (economy) — SUS304 sleeve + engineering-plastic impeller & diffuser + SUS304 shaft (Best price for clean-water irrigation / domestic supply)
- Corrosion (option) — SUS316 sleeve + plastic impeller (plastic is inherently corrosion-proof)
- Sandy (option) — SUS304 impeller upgrade (plastic wears faster in sand)
Componentes premium
- 100% copper motor windings
- Class F (155 °C) insulation system
- NSK-grade sealed ball bearings
- SUS304 shaft + engineering-plastic impellers
- Silicon-carbide (SiC) mechanical seal
- Oil-cooled motor
- PMSM + sensorless FOC sine-wave controller, MPPT >99%
Cable recomendado
PV-to-controller & motor cable 2.5–4 mm² by model (copper, sized for a ~50 m run; step up one size per additional ~50 m of drop).
Per-model cable cross-section is listed in the specification table above (mm² column).
Certificaciones
Preguntas frecuentes
¿Qué opciones de potencia y voltaje ofrece la serie 4″ DC Plastic Impeller Solar Pump?
La serie 4″ DC Plastic Impeller Solar Pump incluye 30 modelos de 300 a 3000 W, con voltajes de sistema de 24 / 48 / 72 / 96 / 144 / 192 / 280 / 385 V.
¿Qué altura y caudal máximos alcanza la serie 4″ DC Plastic Impeller Solar Pump?
Los modelos superiores alcanzan hasta 210 m de altura máx. y hasta 30 m³/h de caudal máx. Son extremos de curva, no un punto de trabajo simultáneo — el modelo exacto se selecciona según la altura, el caudal y el recurso solar requeridos.
¿La serie 4″ DC Plastic Impeller Solar Pump necesita baterías para funcionar con energía solar?
No. Funciona directamente con módulos fotovoltaicos mediante un controlador MPPT (eficiencia de seguimiento >99%), por lo que no se requiere banco de baterías.
¿Incluye la serie 4″ DC Plastic Impeller Solar Pump protección contra marcha en seco?
Sí. Las protecciones integradas incluyen: Overload, Over-current, Under-load, Under-voltage, Reverse-connection, Over-temperature (thermal), Dry-run / low-water, Soft-start. El motor de la bomba tiene grado IP68 (submersible motor) y el controlador IP66.
¿En qué diámetro de pozo cabe la serie 4″ DC Plastic Impeller Solar Pump y a qué profundidad puede instalarse?
Se fabrica en tamaños de 4″ para pozos con un diámetro interior mínimo de 100 mm, con una inmersión máxima de 150 m.
Bomba sumergible
2″ DC Screw Solar Pump
3″–4″ DC Screw Solar Pump
3″ DC Plastic Impeller Solar Pump
