4″–6″ AC/DC Stainless Steel Impeller Solar Pump
Engineering note. Maximum head and maximum flow are curve endpoints, not one simultaneous duty point. Final selection is verified against your total head, required flow and solar resource.
- Permanent-magnet brushless motor + intelligent MPPT (auto start/stop, soft-start)
- Controller LED display: voltage / current / power / speed (RPM) / error code
- Oil cooling
- Full protection: over/under-voltage, overload, over-current, dry-run, reverse, over-temp
- Runs directly off PV modules — no batteries required
- All-stainless SUS304 wetted parts (SUS316 optional for corrosive / coastal water)
Curvas de rendimiento (Q–H)
Curva altura–caudal de cada modelo de esta serie — datos exactos de nuestras fichas técnicas.
Especificaciones
| # | Model | Voltaje (V) | Potencia (W) | Corriente (A) | Caudal máx. (m³/h) | Altura máx. (m) | Salida | Ø (mm) | Longitud (mm) | Peso (kg) | Cable recomendado (mm²) | FV recomendado |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 4PPSS7.0-40-72-600-H | 72 | 600 | 8.3 | 7 | 40 | 1.5" | 98 | 840 | 10.8 | 2.5 | 3 × 300 Wp |
| 2 | 4PPSS5.5-50-72-600-H | 72 | 600 | 8.3 | 5.5 | 50 | 1.25" | 98 | 840 | 10.8 | 2.5 | 3 × 300 Wp |
| 3 | 4PPSS3.0-80-72-600-H | 72 | 600 | 8.3 | 3 | 80 | 1.25" | 98 | 840 | 10.8 | 2.5 | 3 × 300 Wp |
| 4 | 4PPSS15.0-30-96-750-H | 96 | 750 | 7.8 | 15 | 30 | 2" | 98 | 870 | 11.7 | 2.5 | 3 × 300 Wp |
| 5 | 4PPSS8.0-50-96-750-H | 96 | 750 | 7.8 | 8 | 50 | 1.5" | 98 | 870 | 11.7 | 2.5 | 3 × 300 Wp |
| 6 | 4PPSS5.5-70-96-750-H | 96 | 750 | 7.8 | 5.5 | 70 | 1.25" | 98 | 870 | 11.7 | 2.5 | 3 × 300 Wp |
| 7 | 4PPSS3.0-100-96-750-H | 96 | 750 | 7.8 | 3 | 100 | 1.25" | 98 | 870 | 11.7 | 2.5 | 3 × 300 Wp |
| 8 | 4PPSS15.0-45-144-1100-H | 144 | 1100 | 7.6 | 15 | 45 | 2" | 98 | 955 | 13.9 | 2.5 | 6 × 300 Wp |
| 9 | 4PPSS8.0-80-144-1100-H | 144 | 1100 | 7.6 | 8 | 80 | 1.5" | 98 | 955 | 13.9 | 2.5 | 6 × 300 Wp |
| 10 | 4PPSS5.5-100-144-1100-H | 144 | 1100 | 7.6 | 5.5 | 100 | 1.25" | 98 | 955 | 13.9 | 2.5 | 6 × 300 Wp |
| 11 | 4PPSS3.0-140-144-1100-H | 144 | 1100 | 7.6 | 3 | 140 | 1.25" | 98 | 955 | 13.9 | 2.5 | 6 × 300 Wp |
| 12 | 6PPSS25.0-30-192-1500-H | 192 | 1500 | 7.8 | 25 | 30 | 3" | 144 | 1170 | 29 | 2.5 | 8 × 300 Wp |
| 13 | 4PPSS21.0-40-192-1500-H | 192 | 1500 | 7.8 | 21 | 40 | 2" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 14 | 4PPSS16.0-70-192-1500-H | 192 | 1500 | 7.8 | 16 | 70 | 2" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 15 | 4PPSS9.0-100-192-1500-H | 192 | 1500 | 7.8 | 9 | 100 | 1.5" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 16 | 4PPSS6.0-130-192-1500-H | 192 | 1500 | 7.8 | 6 | 130 | 1.25" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 17 | 4PPSS3.0-170-192-1500-H | 192 | 1500 | 7.8 | 3 | 170 | 1.25" | 98 | 1045 | 16.4 | 2.5 | 8 × 300 Wp |
| 18 | 6PPSS25.0-45-280-2200-H | 280 | 2200 | 7.9 | 25 | 45 | 3" | 144 | 1295 | 35.1 | 2.5 | 10 × 300 Wp |
| 19 | 4PPSS21.0-60-280-2200-H | 280 | 2200 | 7.9 | 21 | 60 | 2" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 20 | 4PPSS17.0-100-280-2200-H | 280 | 2200 | 7.9 | 17 | 100 | 2" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 21 | 4PPSS9.0-140-280-2200-H | 280 | 2200 | 7.9 | 9 | 140 | 1.5" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 22 | 4PPSS6.0-190-280-2200-H | 280 | 2200 | 7.9 | 6 | 190 | 1.25" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
| 23 | 4PPSS3.5-260-280-2200-H | 280 | 2200 | 7.9 | 3.5 | 260 | 1.25" | 98 | 1205 | 20.9 | 2.5 | 10 × 300 Wp |
Motor & Accionamiento
| Motor | Permanent-magnet DC brushless (PMSM) |
| Accionamiento | Sensorless FOC, pure sine-wave output |
| Seguimiento MPPT | >99% |
| Clase de aislamiento | F (155 °C) |
| Servicio | S1 (continuous) |
| Protección IP | IP68 (submersible motor) / IP66 |
| Inmersión máx. | 150 m |
| Garantía | 3 |
Controlador & Protecciones
| Controlador | Sensorless FOC sine-wave vector drive + MPPT (>99%), LED display |
| Pantalla | Voltage, Current, Power, Speed (RPM), Speed adjustment, Error code |
| Tamaño del controlador | 360 × 260 × 140 mm |
Condiciones de operación
| Temperatura del agua | 0–40 °C |
| Contenido de arena | ≤ 0.05 % (≤ 500 g/m³) |
| Rango de pH | 5–9 |
| Temperatura ambiente | -15 to 70 °C |
| Pozo mín. | 100–150 mm |
Materiales
- Standard — SUS304 impeller, diffuser, sleeve & shaft (All-stainless wetted parts — the durable quality line)
- Corrosion (option) — SUS316 wetted parts
Componentes premium
- 100% copper motor windings
- Class F (155 °C) insulation system
- NSK-grade sealed ball bearings
- SUS304 shaft & impellers (SUS316 optional)
- Silicon-carbide (SiC) mechanical seal
- Oil-cooled motor
- PMSM + sensorless FOC sine-wave controller, MPPT >99%
Cable recomendado
PV-to-controller & motor cable 2.5 mm² by model (copper, sized for a ~50 m run; step up one size per additional ~50 m of drop).
Per-model cable cross-section is listed in the specification table above (mm² column).
Certificaciones
Preguntas frecuentes
¿Qué opciones de potencia y voltaje ofrece la serie 4″–6″ AC/DC Stainless Steel Impeller Solar Pump?
La serie 4″–6″ AC/DC Stainless Steel Impeller Solar Pump incluye 23 modelos de 600 a 2200 W, con voltajes de sistema de 72 / 96 / 144 / 192 / 280 V.
¿Qué altura y caudal máximos alcanza la serie 4″–6″ AC/DC Stainless Steel Impeller Solar Pump?
Los modelos superiores alcanzan hasta 260 m de altura máx. y hasta 25 m³/h de caudal máx. Son extremos de curva, no un punto de trabajo simultáneo — el modelo exacto se selecciona según la altura, el caudal y el recurso solar requeridos.
¿La serie 4″–6″ AC/DC Stainless Steel Impeller Solar Pump necesita baterías para funcionar con energía solar?
No. Funciona directamente con módulos fotovoltaicos mediante un controlador MPPT (eficiencia de seguimiento >99%) y, al ser un híbrido AC/DC, también puede funcionar con red de 220 V AC (90–240 V, 50/60 Hz) o generador mediante un conmutador de transferencia externo — sin banco de baterías.
¿Incluye la serie 4″–6″ AC/DC Stainless Steel Impeller Solar Pump protección contra marcha en seco?
Sí. Las protecciones integradas incluyen: Overload, Over-current, Under-load, Under-voltage, Reverse-connection, Over-temperature (thermal), Dry-run / low-water, Soft-start. El motor de la bomba tiene grado IP68 (submersible motor) y el controlador IP66.
¿En qué diámetro de pozo cabe la serie 4″–6″ AC/DC Stainless Steel Impeller Solar Pump y a qué profundidad puede instalarse?
Se fabrica en tamaños de 4″ / 6″ para pozos con un diámetro interior mínimo de 100–150 mm, con una inmersión máxima de 150 m.
Bomba sumergible
2″ DC Screw Solar Pump
3″–4″ DC Screw Solar Pump
3″ DC Plastic Impeller Solar Pump
