Powering Water with Sunshine — The Professional Solar Water Pump Provider
Solar Pump Range
Choose by application, then by power source (DC or AC/DC hybrid).
Aquasolar manufactures 16 series / 209 models of solar water pump (150–3000 W, up to 260 m head and 80 m³/h) in both DC and AC/DC hybrid versions — submersible, surface and pool. All run straight from solar panels through an MPPT controller with no batteries required, and ship to 70+ countries with CE, RoHS, CB, TUV, SGS and ISO 9001 certification.
How Solar Water Pumping Works
A solar water pump turns sunlight directly into water — no grid, no fuel, no batteries required. Here is how the system works, how to size one, and where it is used.
Built for real-world water
Full-range DC & AC/DC solar water pumps for irrigation, livestock, off-grid homes and community water supply — reliable, efficient, trusted in 70+ countries.
MPPT
Controller
Efficiency
Motor
Protection
Motor
Protection
Controller
Find the right pump in 30 seconds
Head + flow in, matching models out — free instant selection from our full range.
Applications
Wherever the sun shines and water is needed.
Solar Water Pumps for Irrigation
Replace diesel with sunshine: solar pumping delivers water for drip, sprinkler and flood irrigation at zero fuel cost. From smallholder plots to 40-hectare farms, an Aquasolar system typically pays for itself within 1–3 seasons.
↗
Community & Village Water Supply
Reliable, low-maintenance water schemes for villages, schools and clinics. Pump to an elevated tank during the day and distribute by gravity around the clock.
↗
Solar Pumps for Livestock Watering
Keep troughs full on remote pasture with no grid and no fuel runs. A small solar array and a borehole pump water cattle, sheep and goats automatically, every sunny day.
↗
15+ years building solar water pumps — and nothing else
Aquasolar is a professional solar water pump manufacturer founded in 2010 in Shanghai, China. Solar pumping is not a side line for us: it is the only thing we design, build and export.
We build our own permanent-magnet motors and sensorless FOC controllers in-house, run automated assembly and test lines, and ship more than 600,000 pumps a year to over 70 countries. Every unit is performance- and insulation-tested before it leaves the factory, and our export team supports distributors, EPCs and government water projects from enquiry through after-sales.
Why Aquasolar
Six reasons buyers in 70+ countries keep coming back.
Specialist, not a trader
A dedicated solar pump factory since 2010 — we own the tooling, the test benches and the after-sales, so you deal with the people who actually build the pump.
Core technology in-house
Our own permanent-magnet (PMSM) motors and sensorless FOC sine-wave controllers with MPPT >99% — up to 92% motor efficiency and 20–30% more water per day than ordinary AC pumps.
The widest range in one place
16 series and 209 models, 150–3,000 W, 2″–6″, DC and AC/DC hybrid — submersible, surface and pool. One supplier covers your whole project list.
Built for hard water conditions
Material grades matched to your water: SUS304 as standard, SUS316 for coastal and brackish water, progressive-cavity screw pumps for silty and sandy wells.
Tested and certified
Every pump is performance- and insulation-tested before shipping. CE, RoHS, CB, TUV, SGS, ISO 9001 and ISO 14001, built to IEC 62253 / 60034 / 60529.
Real export support
Engineering selection within 24 hours, OEM and ODM service, full datasheets and catalogues to download, and a 2-year warranty (3 years on stainless flagship lines).
Aquasolar pumps are built to international standards — IEC 62253 · IEC 60034 · IEC 60529 — and independently certified for safety, quality and environmental compliance.
Working under the sun in 70+ countries
Real installations across Africa, the Middle East, Asia and Latin America — explore featured projects on the map.
How does a solar water pump work — do I need batteries?
The pump runs directly from solar panels through an MPPT controller: sunlight in, water out. No batteries are needed — pump into a storage tank during the day and use gravity at night. If you need water on demand around the clock, choose an AC/DC hybrid model that also accepts grid or generator power.
Should I choose a DC pump or an AC/DC hybrid?
If you can store water in a tank, a pure DC pump gives the best value and simplest install. If you need water at any hour, or your region has long cloudy spells, an AC/DC hybrid switches automatically to grid or generator power when solar is weak.
How do I size the pump and the solar array?
Two numbers decide it: total head (vertical lift plus pipe losses) and required flow. Use our online Pump Selector for an instant shortlist. For panels, size the PV array at roughly 1.3–1.5× the pump’s rated power — every datasheet lists the recommended array for each model.
Can your pumps handle sandy or salty water?
Yes — the key is matching materials to the water. For sandy boreholes choose our screw pumps (sand tolerance up to 0.25%) or stainless-impeller models; for brackish or coastal water we offer SUS316 wetted parts; pool pumps use corrosion-proof engineering plastic.
Need the right pump for your project?
Tell us your head, flow and water source — our engineers reply within 24 hours.
Send Inquiry↗